Package | Description |
---|---|
org.omg.CORBA |
Provides the mapping of the OMG CORBA APIs to the JavaTM
programming language, including the class ORB, which is implemented
so that a programmer can use it as a fully-functional Object Request Broker
(ORB).
|
org.omg.CORBA.portable |
Provides a portability layer, that is, a set of ORB APIs
that makes it possible for code generated
by one vendor to run on another vendor's ORB.
|
org.omg.CosNaming |
Provides a naming service for Java IDL.
|
org.omg.CosNaming.NamingContextExtPackage |
This package contains the following classes, which are used in
org.omg.CosNaming.NamingContextExt:
|
org.omg.CosNaming.NamingContextPackage |
This package contains Exception classes for the org.omg.CosNaming
package.
|
org.omg.Dynamic |
This package contains the Dynamic module specified in the OMG Portable
Interceptor specification,
http://cgi.omg.org/cgi-bin/doc?ptc/2000-08-06, section 21.9.
|
org.omg.DynamicAny |
Provides classes and interfaces that enable traversal of the data value
associated with an
any at
runtime, and extraction of the primitive constituents of the data value. |
org.omg.DynamicAny.DynAnyFactoryPackage |
This package contains classes and exceptions from the DynAnyFactory
interface of the
DynamicAny module
specified in the OMG The Common Object Request Broker: Architecture and
Specification,
http://cgi.omg.org/cgi-bin/doc?formal/99-10-07, section 9.2.2.
|
org.omg.DynamicAny.DynAnyPackage |
This package contains classes and exceptions from the DynAny
interface of the DynamicAny module
specified in the OMG The Common Object Request Broker: Architecture and
Specification,
http://cgi.omg.org/cgi-bin/doc?formal/99-10-07, section 9.2.
|
org.omg.IOP |
This package contains the IOP module specified in the OMG document
The Common
Object Request Broker: Architecture and Specification,
http://cgi.omg.org/cgi-bin/doc?formal/99-10-07, section 13.6.
|
org.omg.IOP.CodecFactoryPackage |
This package contains the exceptions
specified in the IOP::CodeFactory interface (as part of the Portable
Interceptors spec).
|
org.omg.IOP.CodecPackage |
This package is generated from the IOP::Codec IDL interface
definition.
|
org.omg.Messaging |
This package contains the Messaging module specified in the OMG CORBA
Messaging specification,
http://cgi.omg.org/cgi-bin/doc?formal/99-10-07.
|
org.omg.PortableInterceptor |
Provides a mechanism to register ORB hooks through which ORB services
can intercept the normal flow of execution of the ORB.
|
org.omg.PortableInterceptor.ORBInitInfoPackage |
This package contains the exceptions and typedefs from the ORBInitInfo
local interface of the PortableInterceptor module specified in the OMG
Portable Interceptor specification,
http://cgi.omg.org/cgi-bin/doc?ptc/2000-08-06, section 21.7.2.
|
org.omg.PortableServer |
Provides classes and interfaces for making the server side of your applications
portable across multivendor ORBs.
|
org.omg.PortableServer.CurrentPackage |
Provides method implementations with
access to the identity of the object on which the
method was invoked.
|
org.omg.PortableServer.POAManagerPackage |
Encapsulates the processing
state of the POAs it is associated with.
|
org.omg.PortableServer.POAPackage |
Allows programmers to construct object implementations that are portable
between different ORB products.
|
Modifier and Type | Field and Description |
---|---|
Any |
UnknownUserException.except
The
Any instance that contains the actual user exception thrown
by the server. |
Any |
UnionMember.label
The label of the union member described by this
UnionMember object. |
Any |
AnyHolder.value
The
Any value held by this AnyHolder object. |
Any[] |
AnySeqHolder.value |
Any |
NameValuePair.value
The value to be associated with a name by this
NameValuePair object. |
Modifier and Type | Method and Description |
---|---|
abstract Any |
Request.add_in_arg()
Creates an input argument and adds it to this
Request
object. |
abstract Any |
Request.add_inout_arg()
Adds an input/output argument to this
Request object. |
abstract Any |
Request.add_named_in_arg(String name)
Creates an input argument with the given name and adds it to
this
Request object. |
abstract Any |
Request.add_named_inout_arg(String name)
Adds an input/output argument with the given name to this
Request object. |
abstract Any |
Request.add_named_out_arg(String name)
Adds an output argument with the given name to this
Request object. |
abstract Any |
Request.add_out_arg()
Adds an output argument to this
Request object. |
abstract Any |
ORB.create_any()
Creates an IDL
Any object initialized to
contain a Typecode object whose kind field
is set to TCKind.tc_null . |
abstract Any |
Any.extract_any()
Extracts the
Any object in this
Any object's value field. |
static Any[] |
AnySeqHelper.extract(Any a) |
Any |
DynAny.get_any()
Deprecated.
Retrieves the
org.omg.CORBA.Any contained
in this DynAny object. |
Any[] |
DynArray.get_elements()
Deprecated.
Returns the value of all the elements of this array.
|
Any[] |
DynSequence.get_elements()
Deprecated.
Returns the value of every element in this sequence.
|
abstract Any |
TypeCode.member_label(int index)
Retrieves the label of the union member
identified by the given index.
|
Any |
DataInputStream.read_any()
Reads an IDL
Any value from the input stream. |
static Any[] |
AnySeqHelper.read(InputStream istream) |
abstract Any |
Request.return_value()
Returns the
Any object that contains the value for the
result of the method. |
Any |
DynAny.to_any()
Deprecated.
Convert a
DynAny object to an Any
object. |
abstract Any |
NamedValue.value()
Retrieves the value for this
NamedValue object. |
Modifier and Type | Method and Description |
---|---|
abstract NamedValue |
NVList.add_value(String item_name,
Any val,
int flags)
Creates a new
NamedValue object initialized with the
given name, value, and flag,
and adds it to the end of this NVList object. |
DynAny |
ORB.create_dyn_any(Any value)
Deprecated.
Use the new DynAnyFactory API instead
|
abstract NamedValue |
ORB.create_named_value(String s,
Any any,
int flags)
Creates a
NamedValue object
using the given name, value, and argument mode flags. |
Policy |
ORB.create_policy(int type,
Any val)
Can be invoked to create new instances of policy objects
of a specific type with specified initial state.
|
abstract boolean |
Any.equal(Any a)
Checks for equality between this
Any object and the
given Any object. |
void |
ServerRequest.except(Any any)
Deprecated.
use set_exception()
|
static PolicyError |
PolicyErrorHelper.extract(Any a) |
static short |
PolicyErrorCodeHelper.extract(Any a) |
static String[] |
WStringSeqHelper.extract(Any a) |
static String[] |
StringSeqHelper.extract(Any a) |
static ParameterMode |
ParameterModeHelper.extract(Any a) |
static long[] |
ULongLongSeqHelper.extract(Any a) |
static ServiceInformation |
ServiceInformationHelper.extract(Any a) |
static IDLType |
IDLTypeHelper.extract(Any a) |
static Object |
ObjectHelper.extract(Any a) |
static CompletionStatus |
CompletionStatusHelper.extract(Any a) |
static long[] |
LongLongSeqHelper.extract(Any a) |
static String |
RepositoryIdHelper.extract(Any a) |
static Serializable |
ValueBaseHelper.extract(Any a) |
static char[] |
WCharSeqHelper.extract(Any a) |
static DefinitionKind |
DefinitionKindHelper.extract(Any a) |
static StructMember |
StructMemberHelper.extract(Any a) |
static String |
StringValueHelper.extract(Any a) |
static Policy[] |
PolicyListHelper.extract(Any a) |
static String |
FieldNameHelper.extract(Any a) |
static ValueMember |
ValueMemberHelper.extract(Any a) |
static ServiceDetail |
ServiceDetailHelper.extract(Any a) |
static char[] |
CharSeqHelper.extract(Any a) |
static String |
VersionSpecHelper.extract(Any a) |
static UnionMember |
UnionMemberHelper.extract(Any a) |
static byte[] |
OctetSeqHelper.extract(Any a) |
static int |
PolicyTypeHelper.extract(Any a) |
static String |
IdentifierHelper.extract(Any a) |
static short[] |
ShortSeqHelper.extract(Any a) |
static float[] |
FloatSeqHelper.extract(Any a) |
static int[] |
ULongSeqHelper.extract(Any a) |
static Any[] |
AnySeqHelper.extract(Any a) |
static Current |
CurrentHelper.extract(Any a) |
static short[] |
UShortSeqHelper.extract(Any a) |
static Policy |
PolicyHelper.extract(Any a) |
static double[] |
DoubleSeqHelper.extract(Any a) |
static boolean[] |
BooleanSeqHelper.extract(Any a) |
static WrongTransaction |
WrongTransactionHelper.extract(Any a) |
static SetOverrideType |
SetOverrideTypeHelper.extract(Any a) |
static UnknownUserException |
UnknownUserExceptionHelper.extract(Any a) |
static NameValuePair |
NameValuePairHelper.extract(Any a) |
static int[] |
LongSeqHelper.extract(Any a) |
static String |
WStringValueHelper.extract(Any a) |
static short |
VisibilityHelper.extract(Any a) |
void |
DynAny.from_any(Any value)
Deprecated.
Make a
DynAny object from an Any
object. |
void |
DynAny.insert_any(Any value)
Deprecated.
Inserts the given
org.omg.CORBA.Any object as the value for this
DynAny object. |
abstract void |
Any.insert_any(Any a)
Inserts the given
Any object
into this Any object's value field. |
static void |
AnySeqHelper.insert(Any a,
Any[] that) |
static void |
AnySeqHelper.insert(Any a,
Any[] that) |
static void |
BooleanSeqHelper.insert(Any a,
boolean[] that) |
static void |
OctetSeqHelper.insert(Any a,
byte[] that) |
static void |
WCharSeqHelper.insert(Any a,
char[] that) |
static void |
CharSeqHelper.insert(Any a,
char[] that) |
static void |
CompletionStatusHelper.insert(Any a,
CompletionStatus that) |
static void |
CurrentHelper.insert(Any a,
Current that) |
static void |
DefinitionKindHelper.insert(Any a,
DefinitionKind that) |
static void |
DoubleSeqHelper.insert(Any a,
double[] that) |
static void |
FloatSeqHelper.insert(Any a,
float[] that) |
static void |
IDLTypeHelper.insert(Any a,
IDLType that) |
static void |
PolicyTypeHelper.insert(Any a,
int that) |
static void |
ULongSeqHelper.insert(Any a,
int[] that) |
static void |
LongSeqHelper.insert(Any a,
int[] that) |
static void |
ULongLongSeqHelper.insert(Any a,
long[] that) |
static void |
LongLongSeqHelper.insert(Any a,
long[] that) |
static void |
NameValuePairHelper.insert(Any a,
NameValuePair that) |
static void |
ObjectHelper.insert(Any a,
Object that) |
static void |
ParameterModeHelper.insert(Any a,
ParameterMode that) |
static void |
PolicyHelper.insert(Any a,
Policy that) |
static void |
PolicyListHelper.insert(Any a,
Policy[] that) |
static void |
PolicyErrorHelper.insert(Any a,
PolicyError that) |
static void |
ValueBaseHelper.insert(Any a,
Serializable that) |
static void |
ServiceDetailHelper.insert(Any a,
ServiceDetail that) |
static void |
ServiceInformationHelper.insert(Any a,
ServiceInformation that) |
static void |
SetOverrideTypeHelper.insert(Any a,
SetOverrideType that) |
static void |
PolicyErrorCodeHelper.insert(Any a,
short that) |
static void |
VisibilityHelper.insert(Any a,
short that) |
static void |
ShortSeqHelper.insert(Any a,
short[] that) |
static void |
UShortSeqHelper.insert(Any a,
short[] that) |
static void |
RepositoryIdHelper.insert(Any a,
String that) |
static void |
StringValueHelper.insert(Any a,
String that) |
static void |
FieldNameHelper.insert(Any a,
String that) |
static void |
VersionSpecHelper.insert(Any a,
String that) |
static void |
IdentifierHelper.insert(Any a,
String that) |
static void |
WStringValueHelper.insert(Any a,
String that) |
static void |
WStringSeqHelper.insert(Any a,
String[] that) |
static void |
StringSeqHelper.insert(Any a,
String[] that) |
static void |
StructMemberHelper.insert(Any a,
StructMember that) |
static void |
UnionMemberHelper.insert(Any a,
UnionMember that) |
static void |
UnknownUserExceptionHelper.insert(Any a,
UnknownUserException that) |
static void |
ValueMemberHelper.insert(Any a,
ValueMember that) |
static void |
WrongTransactionHelper.insert(Any a,
WrongTransaction that) |
void |
ServerRequest.result(Any any)
Deprecated.
use the method
set_result |
void |
DynArray.set_elements(Any[] value)
Deprecated.
Sets the value of this
DynArray object to the given array. |
void |
DynSequence.set_elements(Any[] value)
Deprecated.
Sets the values of all elements in this sequence with the given
array.
|
void |
ServerRequest.set_exception(Any any)
Throws an
org.omg.CORBA.NO_IMPLEMENT exception. |
abstract void |
Context.set_one_value(String propname,
Any propvalue)
Creates a
NamedValue object and adds it to this
Context object. |
void |
ServerRequest.set_result(Any any)
Throws an
org.omg.CORBA.NO_IMPLEMENT exception. |
void |
DataOutputStream.write_any_array(Any[] seq,
int offset,
int length)
Writes the array of IDL Anys from offset for length elements to the
output stream.
|
void |
DataOutputStream.write_any(Any value)
Writes the Any value to the output stream.
|
static void |
AnySeqHelper.write(OutputStream ostream,
Any[] value) |
Constructor and Description |
---|
AnyHolder(Any initial)
Constructs a new
AnyHolder object for the given
Any object. |
AnySeqHolder(Any[] initialValue) |
NameValuePair(String __id,
Any __value)
Constructs a
NameValuePair object that associates
the given name with the given org.omg.CORBA.Any object. |
UnionMember(String __name,
Any __label,
TypeCode __type,
IDLType __type_def)
Constructs a new
UnionMember object with its fields initialized
to the given values. |
UnknownUserException(Any a)
Constructs an
UnknownUserException object that contains the given
Any object. |
Modifier and Type | Method and Description |
---|---|
abstract Any |
InputStream.read_any()
Reads an Any from this input stream.
|
Modifier and Type | Method and Description |
---|---|
abstract void |
OutputStream.write_any(Any value)
Writes an Any on this output stream.
|
Modifier and Type | Method and Description |
---|---|
static NamingContextExt |
NamingContextExtHelper.extract(Any a) |
static NamingContext |
NamingContextHelper.extract(Any a) |
static BindingIterator |
BindingIteratorHelper.extract(Any a) |
static Binding[] |
BindingListHelper.extract(Any a) |
static Binding |
BindingHelper.extract(Any a) |
static BindingType |
BindingTypeHelper.extract(Any a) |
static NameComponent[] |
NameHelper.extract(Any a) |
static NameComponent |
NameComponentHelper.extract(Any a) |
static String |
IstringHelper.extract(Any a) |
static void |
BindingHelper.insert(Any a,
Binding that) |
static void |
BindingListHelper.insert(Any a,
Binding[] that) |
static void |
BindingIteratorHelper.insert(Any a,
BindingIterator that) |
static void |
BindingTypeHelper.insert(Any a,
BindingType that) |
static void |
NameComponentHelper.insert(Any a,
NameComponent that) |
static void |
NameHelper.insert(Any a,
NameComponent[] that) |
static void |
NamingContextHelper.insert(Any a,
NamingContext that) |
static void |
NamingContextExtHelper.insert(Any a,
NamingContextExt that) |
static void |
IstringHelper.insert(Any a,
String that) |
Modifier and Type | Method and Description |
---|---|
static InvalidAddress |
InvalidAddressHelper.extract(Any a) |
static String |
URLStringHelper.extract(Any a) |
static String |
AddressHelper.extract(Any a) |
static String |
StringNameHelper.extract(Any a) |
static void |
InvalidAddressHelper.insert(Any a,
InvalidAddress that) |
static void |
URLStringHelper.insert(Any a,
String that) |
static void |
AddressHelper.insert(Any a,
String that) |
static void |
StringNameHelper.insert(Any a,
String that) |
Modifier and Type | Method and Description |
---|---|
static NotEmpty |
NotEmptyHelper.extract(Any a) |
static AlreadyBound |
AlreadyBoundHelper.extract(Any a) |
static InvalidName |
InvalidNameHelper.extract(Any a) |
static CannotProceed |
CannotProceedHelper.extract(Any a) |
static NotFound |
NotFoundHelper.extract(Any a) |
static NotFoundReason |
NotFoundReasonHelper.extract(Any a) |
static void |
AlreadyBoundHelper.insert(Any a,
AlreadyBound that) |
static void |
CannotProceedHelper.insert(Any a,
CannotProceed that) |
static void |
InvalidNameHelper.insert(Any a,
InvalidName that) |
static void |
NotEmptyHelper.insert(Any a,
NotEmpty that) |
static void |
NotFoundHelper.insert(Any a,
NotFound that) |
static void |
NotFoundReasonHelper.insert(Any a,
NotFoundReason that) |
Modifier and Type | Field and Description |
---|---|
Any |
Parameter.argument |
Constructor and Description |
---|
Parameter(Any _argument,
ParameterMode _mode) |
Modifier and Type | Field and Description |
---|---|
Any |
NameValuePair.value
The Any value associated with the name.
|
Modifier and Type | Method and Description |
---|---|
static Any[] |
AnySeqHelper.extract(Any a) |
Any |
_DynValueStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
_DynArrayStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
_DynSequenceStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
_DynUnionStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
_DynStructStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
_DynEnumStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
_DynFixedStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
_DynAnyStub.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
DynAnyOperations.get_any()
Extracts an Any value contained in the Any represented by this DynAny.
|
Any |
DynValueBoxOperations.get_boxed_value()
Returns the boxed value as an Any.
|
Any[] |
_DynArrayStub.get_elements()
Returns the elements of the DynArray.
|
Any[] |
_DynSequenceStub.get_elements()
Returns the elements of the sequence.
|
Any[] |
DynSequenceOperations.get_elements()
Returns the elements of the sequence.
|
Any[] |
DynArrayOperations.get_elements()
Returns the elements of the DynArray.
|
static Any[] |
AnySeqHelper.read(InputStream istream) |
Any |
_DynValueStub.to_any()
Creates an any value from a DynAny object.
|
Any |
_DynArrayStub.to_any()
Creates an any value from a DynAny object.
|
Any |
_DynSequenceStub.to_any()
Creates an any value from a DynAny object.
|
Any |
_DynUnionStub.to_any()
Creates an any value from a DynAny object.
|
Any |
_DynStructStub.to_any()
Creates an any value from a DynAny object.
|
Any |
_DynEnumStub.to_any()
Creates an any value from a DynAny object.
|
Any |
_DynFixedStub.to_any()
Creates an any value from a DynAny object.
|
Any |
_DynAnyStub.to_any()
Creates an any value from a DynAny object.
|
Any |
DynAnyOperations.to_any()
Creates an any value from a DynAny object.
|
Modifier and Type | Method and Description |
---|---|
DynAny |
_DynAnyFactoryStub.create_dyn_any(Any value)
Creates a new DynAny object from an any value.
|
DynAny |
DynAnyFactoryOperations.create_dyn_any(Any value)
Creates a new DynAny object from an any value.
|
static DynAnyFactory |
DynAnyFactoryHelper.extract(Any a) |
static DynValue |
DynValueHelper.extract(Any a) |
static DynArray |
DynArrayHelper.extract(Any a) |
static DynSequence |
DynSequenceHelper.extract(Any a) |
static DynAny[] |
DynAnySeqHelper.extract(Any a) |
static Any[] |
AnySeqHelper.extract(Any a) |
static DynUnion |
DynUnionHelper.extract(Any a) |
static DynStruct |
DynStructHelper.extract(Any a) |
static NameDynAnyPair[] |
NameDynAnyPairSeqHelper.extract(Any a) |
static NameDynAnyPair |
NameDynAnyPairHelper.extract(Any a) |
static NameValuePair[] |
NameValuePairSeqHelper.extract(Any a) |
static NameValuePair |
NameValuePairHelper.extract(Any a) |
static String |
FieldNameHelper.extract(Any a) |
static DynEnum |
DynEnumHelper.extract(Any a) |
static DynFixed |
DynFixedHelper.extract(Any a) |
static DynAny |
DynAnyHelper.extract(Any a) |
void |
_DynValueStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynArrayStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynSequenceStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynUnionStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynStructStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynEnumStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynFixedStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynAnyStub.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
DynAnyOperations.from_any(Any value)
Initializes the value associated with a DynAny object with the value contained in an any.
|
void |
_DynValueStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
_DynArrayStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
_DynSequenceStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
_DynUnionStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
_DynStructStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
_DynEnumStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
_DynFixedStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
_DynAnyStub.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
void |
DynAnyOperations.insert_any(Any value)
Inserts an Any value into the Any represented by this DynAny.
|
static void |
AnySeqHelper.insert(Any a,
Any[] that) |
static void |
AnySeqHelper.insert(Any a,
Any[] that) |
static void |
DynAnyHelper.insert(Any a,
DynAny that) |
static void |
DynAnySeqHelper.insert(Any a,
DynAny[] that) |
static void |
DynAnyFactoryHelper.insert(Any a,
DynAnyFactory that) |
static void |
DynArrayHelper.insert(Any a,
DynArray that) |
static void |
DynEnumHelper.insert(Any a,
DynEnum that) |
static void |
DynFixedHelper.insert(Any a,
DynFixed that) |
static void |
DynSequenceHelper.insert(Any a,
DynSequence that) |
static void |
DynStructHelper.insert(Any a,
DynStruct that) |
static void |
DynUnionHelper.insert(Any a,
DynUnion that) |
static void |
DynValueHelper.insert(Any a,
DynValue that) |
static void |
NameDynAnyPairHelper.insert(Any a,
NameDynAnyPair that) |
static void |
NameDynAnyPairSeqHelper.insert(Any a,
NameDynAnyPair[] that) |
static void |
NameValuePairHelper.insert(Any a,
NameValuePair that) |
static void |
NameValuePairSeqHelper.insert(Any a,
NameValuePair[] that) |
static void |
FieldNameHelper.insert(Any a,
String that) |
void |
DynValueBoxOperations.set_boxed_value(Any boxed)
Replaces the boxed value with the specified value.
|
void |
_DynArrayStub.set_elements(Any[] value)
Sets the DynArray to contain the passed elements.
|
void |
_DynSequenceStub.set_elements(Any[] value)
Sets the elements of a sequence.
|
void |
DynSequenceOperations.set_elements(Any[] value)
Sets the elements of a sequence.
|
void |
DynArrayOperations.set_elements(Any[] value)
Sets the DynArray to contain the passed elements.
|
static void |
AnySeqHelper.write(OutputStream ostream,
Any[] value) |
Constructor and Description |
---|
NameValuePair(String _id,
Any _value) |
Modifier and Type | Method and Description |
---|---|
static InconsistentTypeCode |
InconsistentTypeCodeHelper.extract(Any a) |
static void |
InconsistentTypeCodeHelper.insert(Any a,
InconsistentTypeCode that) |
Modifier and Type | Method and Description |
---|---|
static TypeMismatch |
TypeMismatchHelper.extract(Any a) |
static InvalidValue |
InvalidValueHelper.extract(Any a) |
static void |
InvalidValueHelper.insert(Any a,
InvalidValue that) |
static void |
TypeMismatchHelper.insert(Any a,
TypeMismatch that) |
Modifier and Type | Method and Description |
---|---|
Any |
CodecOperations.decode_value(byte[] data,
TypeCode tc)
Decodes the given byte array into an Any based on the given
TypeCode and the encoding format effective for
this Codec . |
Any |
CodecOperations.decode(byte[] data)
Decodes the given byte array into an Any based on the encoding
format effective for this
Codec . |
Modifier and Type | Method and Description |
---|---|
byte[] |
CodecOperations.encode_value(Any data)
Converts the given any into a byte array based on the encoding
format effective for this Codec.
|
byte[] |
CodecOperations.encode(Any data)
Converts the given any into a byte array based on the encoding
format effective for this
Codec . |
static CodecFactory |
CodecFactoryHelper.extract(Any a) |
static ServiceContext[] |
ServiceContextListHelper.extract(Any a) |
static ServiceContext |
ServiceContextHelper.extract(Any a) |
static int |
ServiceIdHelper.extract(Any a) |
static TaggedComponent[] |
MultipleComponentProfileHelper.extract(Any a) |
static TaggedComponent |
TaggedComponentHelper.extract(Any a) |
static int |
ComponentIdHelper.extract(Any a) |
static IOR |
IORHelper.extract(Any a) |
static TaggedProfile |
TaggedProfileHelper.extract(Any a) |
static int |
ProfileIdHelper.extract(Any a) |
static void |
CodecFactoryHelper.insert(Any a,
CodecFactory that) |
static void |
ServiceIdHelper.insert(Any a,
int that) |
static void |
ComponentIdHelper.insert(Any a,
int that) |
static void |
ProfileIdHelper.insert(Any a,
int that) |
static void |
IORHelper.insert(Any a,
IOR that) |
static void |
ServiceContextHelper.insert(Any a,
ServiceContext that) |
static void |
ServiceContextListHelper.insert(Any a,
ServiceContext[] that) |
static void |
TaggedComponentHelper.insert(Any a,
TaggedComponent that) |
static void |
MultipleComponentProfileHelper.insert(Any a,
TaggedComponent[] that) |
static void |
TaggedProfileHelper.insert(Any a,
TaggedProfile that) |
Modifier and Type | Method and Description |
---|---|
static UnknownEncoding |
UnknownEncodingHelper.extract(Any a) |
static void |
UnknownEncodingHelper.insert(Any a,
UnknownEncoding that) |
Modifier and Type | Method and Description |
---|---|
static TypeMismatch |
TypeMismatchHelper.extract(Any a) |
static FormatMismatch |
FormatMismatchHelper.extract(Any a) |
static InvalidTypeForEncoding |
InvalidTypeForEncodingHelper.extract(Any a) |
static void |
FormatMismatchHelper.insert(Any a,
FormatMismatch that) |
static void |
InvalidTypeForEncodingHelper.insert(Any a,
InvalidTypeForEncoding that) |
static void |
TypeMismatchHelper.insert(Any a,
TypeMismatch that) |
Modifier and Type | Method and Description |
---|---|
static short |
SyncScopeHelper.extract(Any a) |
static void |
SyncScopeHelper.insert(Any a,
short that) |
Modifier and Type | Method and Description |
---|---|
Any |
RequestInfoOperations.get_slot(int id)
Returns the data from the given slot of the
PortableInterceptor.Current that is in the scope of
the request. |
Any |
CurrentOperations.get_slot(int id)
Retrieves the slot data the application set in PICurrent via
get_slot . |
Any |
ClientRequestInfoOperations.received_exception()
Returns an any which contains the exception to be returned to
the client.
|
Any |
RequestInfoOperations.result()
Returns an any containing the result of the operation invocation.
|
Any |
ServerRequestInfoOperations.sending_exception()
Returns an any which contains the exception to be returned to
the client.
|
Modifier and Type | Method and Description |
---|---|
Policy |
PolicyFactoryOperations.create_policy(int type,
Any value)
Returns an instance of the appropriate interface derived from
CORBA.Policy whose value corresponds to the
specified any. |
static IORInterceptor_3_0 |
IORInterceptor_3_0Helper.extract(Any a) |
static short |
AdapterStateHelper.extract(Any a) |
static int |
AdapterManagerIdHelper.extract(Any a) |
static ObjectReferenceTemplate[] |
ObjectReferenceTemplateSeqHelper.extract(Any a) |
static ObjectReferenceTemplate |
ObjectReferenceTemplateHelper.extract(Any a) |
static ObjectReferenceFactory |
ObjectReferenceFactoryHelper.extract(Any a) |
static byte[] |
ObjectIdHelper.extract(Any a) |
static String[] |
AdapterNameHelper.extract(Any a) |
static String |
ORBIdHelper.extract(Any a) |
static String |
ServerIdHelper.extract(Any a) |
static Current |
CurrentHelper.extract(Any a) |
static InvalidSlot |
InvalidSlotHelper.extract(Any a) |
static ForwardRequest |
ForwardRequestHelper.extract(Any a) |
static void |
ObjectIdHelper.insert(Any a,
byte[] that) |
static void |
CurrentHelper.insert(Any a,
Current that) |
static void |
ForwardRequestHelper.insert(Any a,
ForwardRequest that) |
static void |
AdapterManagerIdHelper.insert(Any a,
int that) |
static void |
InvalidSlotHelper.insert(Any a,
InvalidSlot that) |
static void |
IORInterceptor_3_0Helper.insert(Any a,
IORInterceptor_3_0 that) |
static void |
ObjectReferenceFactoryHelper.insert(Any a,
ObjectReferenceFactory that) |
static void |
ObjectReferenceTemplateHelper.insert(Any a,
ObjectReferenceTemplate that) |
static void |
ObjectReferenceTemplateSeqHelper.insert(Any a,
ObjectReferenceTemplate[] that) |
static void |
AdapterStateHelper.insert(Any a,
short that) |
static void |
ORBIdHelper.insert(Any a,
String that) |
static void |
ServerIdHelper.insert(Any a,
String that) |
static void |
AdapterNameHelper.insert(Any a,
String[] that) |
void |
ServerRequestInfoOperations.set_slot(int id,
Any data)
Allows an Interceptor to set a slot in the
PortableInterceptor.Current that is in the scope of
the request. |
void |
CurrentOperations.set_slot(int id,
Any data)
Sets data in a slot.
|
Modifier and Type | Method and Description |
---|---|
static InvalidName |
InvalidNameHelper.extract(Any a) |
static DuplicateName |
DuplicateNameHelper.extract(Any a) |
static String |
ObjectIdHelper.extract(Any a) |
static void |
DuplicateNameHelper.insert(Any a,
DuplicateName that) |
static void |
InvalidNameHelper.insert(Any a,
InvalidName that) |
static void |
ObjectIdHelper.insert(Any a,
String that) |
Modifier and Type | Method and Description |
---|---|
static ServantLocator |
ServantLocatorHelper.extract(Any a) |
static ServantActivator |
ServantActivatorHelper.extract(Any a) |
static ForwardRequest |
ForwardRequestHelper.extract(Any a) |
static POA |
POAHelper.extract(Any a) |
static Current |
CurrentHelper.extract(Any a) |
static void |
CurrentHelper.insert(Any a,
Current that) |
static void |
ForwardRequestHelper.insert(Any a,
ForwardRequest that) |
static void |
POAHelper.insert(Any a,
POA that) |
static void |
ServantActivatorHelper.insert(Any a,
ServantActivator that) |
static void |
ServantLocatorHelper.insert(Any a,
ServantLocator that) |
Modifier and Type | Method and Description |
---|---|
static NoContext |
NoContextHelper.extract(Any a) |
static void |
NoContextHelper.insert(Any a,
NoContext that) |
Modifier and Type | Method and Description |
---|---|
static AdapterInactive |
AdapterInactiveHelper.extract(Any a) |
static void |
AdapterInactiveHelper.insert(Any a,
AdapterInactive that) |
Modifier and Type | Method and Description |
---|---|
static WrongPolicy |
WrongPolicyHelper.extract(Any a) |
static WrongAdapter |
WrongAdapterHelper.extract(Any a) |
static ServantNotActive |
ServantNotActiveHelper.extract(Any a) |
static ServantAlreadyActive |
ServantAlreadyActiveHelper.extract(Any a) |
static ObjectNotActive |
ObjectNotActiveHelper.extract(Any a) |
static ObjectAlreadyActive |
ObjectAlreadyActiveHelper.extract(Any a) |
static NoServant |
NoServantHelper.extract(Any a) |
static InvalidPolicy |
InvalidPolicyHelper.extract(Any a) |
static AdapterNonExistent |
AdapterNonExistentHelper.extract(Any a) |
static AdapterAlreadyExists |
AdapterAlreadyExistsHelper.extract(Any a) |
static void |
AdapterAlreadyExistsHelper.insert(Any a,
AdapterAlreadyExists that) |
static void |
AdapterNonExistentHelper.insert(Any a,
AdapterNonExistent that) |
static void |
InvalidPolicyHelper.insert(Any a,
InvalidPolicy that) |
static void |
NoServantHelper.insert(Any a,
NoServant that) |
static void |
ObjectAlreadyActiveHelper.insert(Any a,
ObjectAlreadyActive that) |
static void |
ObjectNotActiveHelper.insert(Any a,
ObjectNotActive that) |
static void |
ServantAlreadyActiveHelper.insert(Any a,
ServantAlreadyActive that) |
static void |
ServantNotActiveHelper.insert(Any a,
ServantNotActive that) |
static void |
WrongAdapterHelper.insert(Any a,
WrongAdapter that) |
static void |
WrongPolicyHelper.insert(Any a,
WrongPolicy that) |
Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2023, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.